Product Description
Owing to our decades of knowledge, skill and experience in the industry, we are preferred among clients for a remarkable range of Stainless Steel Coil. These coils are largely used to produce sheet, heating element, heat exchanger and moulds, thus find application in chemicals, fertilizers, sugar mills & distilleries, cement industries, ship builders, paper industries, pumps, petrochemicals and oil & natural gas sectors. Our Stainless Steel Coil is made by a team of experienced professionals using best quality stainless steel, following the norms and guidelines laid down by the industry.
Features:
- High impact strength
- Rust proof finish
- High heat resistance
Specifications:
Grade :- 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446 & 202
Sheet Finishing :- 2B, 2D, HR, CR, BA (No. 8), Satin (Met with Plastic Coated)
Sheet & Plate in Form of :- Coils, Foils, Shim Sheet, Perforated Sheet,Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) & Angle, Channel, Tray Etc.
Other Services :- Heat Treatment, Annealing, Pickling, Polish, Electroplating, Anodising, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Test Certificate :- Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection.
Size :- Thickness: 0.1 mm to 48 mm, Width: 1000 mm to 2500 mm, Length: 2000 mm to Coil.
User Industries:
Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
Chemical Composition of Sheets/ Plates
| ASTM | Grade | C max | Mn max | P max | S max | Si max | Ni | Cr | Mo | Others |
| A240 | 304 | 0.08 | 200 | 0.045 | 0.03 | 0.75 | 8.00-11.0 | 18.0-20.0 |
|
|
|
| 304L | 0.03 | 200 | 0.045 | 0.03 | 0.75 | 8.00-11.0 | 18.0-20.0 |
|
|
|
| 310S | 0.08 | 200 | 0.045 | 0.03 | 1.5 | 19.0-22.0 | 24.0-26.0 |
|
|
|
| 316 | 0.08 | 200 | 0.045 | 0.03 | 0.75 | 10.0-14.0 | 16.0-18.0 | 2.00-3.00 |
|
|
| 316L | 0.03 | 200 | 0.045 | 0.03 | 0.75 | 10.1-14.0 | 16.0-18.0 | 2.00-3.00 |
|
|
| 317L | 0.03 | 200 | 0.045 | 0.03 | 0.75 | 11.0-15.0 | 18.0-20.0 | 3.00-4.00 |
|
|
| 321 | 0.08 | 200 | 0.045 | 0.03 | 0.75 | 9.00-12.0 | 17.0-20.0 |
| 5C |
|
| 347 | 0.08 | 200 | 0.045 | 0.03 | 0.75 | 9.00-13.0 | 17.0-20.0 |
| 10C |
|
| Mechanical Requirements | Hardness |
| ASTM | Grade | Tensile Strength Apa (ksi) min | Yield Strength Mpa (ksi)min | Elongation min% | Brinel max HB | Rockwell max HRB |
| A240 | 304 | 205(30) | 205(30) | 40 | 202 | 92 |
|
| 304L | 170(25) | 170(25) | 40 | 183 | 92 |
|
| 310S | 205(25) | 205(25) | 40 | 217 | 88 |
|
| 316 | 205(30) | 205(30) | 40 | 217 | 95 |
|
| 316L | 170(25) | 170(25) | 40 | 217 | 95 |
|
| 317L | 170(25) | 170(25) | 40 | 217 | 95 |
|
| 321 | 205(30) | 205(30) | 40 | 217 | 95 |
|
| 347 | 205(30) | 205(30) | 40 | 183 | 92 |
Send Inquiry
